How To Move a Pool Table: Step-by-Step Guide for a Smooth Relocation
Moving a bigger pool table is never an easy and comfortable task and thing to undertake. Whether you are relocating it to a new location or from one room to another this is a very complex and large piece of furniture that always needs to be handled appropriately. Below is the guideline that can guide you in the exercise if you would wish to relocate your pool table and easily you can get answer to your question how to move a pool table.

1. Gather the Necessary Tools
It is important to be equipped with the suitable tools of trade before you start any work. Socket wrench: A screwdriver: Moving blankets: Staple remover should you find that your table has felt: A dolly for moving the parts of the table. Having those will make the process as easy as you can imagine it to be.
2. Disassemble the Table
Tables and other games such as pool tables are very heavy, however when brought down they become easier to maneuver. Beginning with, it is important to detach the pockets. Generally speaking, most pockets are either screwed or stapled into the material of the garment that they will be a part of. Then, you should require removing the rails of most of them are fixed by bolts to the table base. You can now undo them using a socket wrench, including doing it very gently.
3. Handle the Slate with Care
The slate is thicker at the bottom, and slimmer at the top, and is the most weighty part of the table. It can be single or three-parted depending on a size of the roof that it will cover. From here, be very cautious and take the work off the frame and set it on a trolley or a flat table. Remember that slate is very fragile material that can be quickly cracked, so use it carefully.
4. Wrap and Protect All Parts
As a precaution in the middle of the process of dismantling the part of the pool table, All parts should be wrapped tightly with moving blankets to avoid any scratches or dents. This is especially important depending on the particular work affecting the slate and the wooden frame. Tape or strap the blankets down to ensure that all your items will remain in their right positions during the move.
5. Transport the Parts Safely
Instead, employ a dolly for shifting the chunks which are quite bulkier and include the slate and frame. When it comes to the lighter pieces such as the pockets and the rails they can be transported in the individual ways.
Test the Cushions
With your new cushions installed, it’s time to test them out:
· Take couple of shots around the table to check if the cushions are returning to their original position.
· Ensure for any areas that may require reconsideration or fixing of some glueing spot.
· Everything is now set and it is time to getBa operating your newly modified table, if all the above components were in good condition.
Comments
Post a Comment